Electronet Make Flow Elements

ORIFICE Plate

Product Description :

Electronet series orifice plate is the most common differential pressure primary flow element. It is based on proven technology. It has no moving parts and is suitable for high temperature and pressure applications. Orifice plates are recommended for clean liquids, gases and low velocity steam flows. Flow measurement using orifice plates requires the accurate location of up stream and downstream pressure tapping. Various types of orifice carrier assemblies are available to suit a wide range of applications.

——————————————————————————————————————————————-

ORIFICE Plate Assembly

Product Description :

Electronet series Orifice flanges are intended for use instead of standard pipe flanges when an orifice plate or flow nozzle must be installed. Pairs of pressure tapping are machined into the orifice flange, making separate orifice carriers or tapping in the pipe wall unnecessary. The range of orifice flanges covers all standard sizes and ranges, and all common flange materials. Flanges are available in socket weld or weld neck form, and are typically supplied with two ½” NPT tapping in each flange. Jacking screws to ensure ease of removal of the primary flow element are provided. Orifice flanges are supplied complete with bolting and gasket kits.

——————————————————————————————————————————————-

ORIFICE Integral Assembly

Product Description :

Electronet series Integral orifice plate assembly is integrally mounted with the measuring instrument. It is compact and complete flow meter device without need of impulse piping. The assembly includes integral orifice plate, bodies, stud, nut & gasket bodies with socket weld or threaded end connections are available IOPA with upstream & downstream piping with flanged ends are also available.

——————————————————————————————————————————————-

Venturi Tube

Product Description :

Electronet series Venturi is the second most common differential pressure primary element. It is based on proven technology. It has no moving parts and is suitable for high temperature and pressure applications. Venturi tubes offer advantages including an extremely low pressure loss, a higher durability and a lower chance of catching a sludge media and sediment than other throttle elements. The Venturi tube is mostly used for measurements of flow wherever a minimal loss of pressure is important. The major advantage of the Venturi over orifice plates and flow nozzles is in the area of pressure recovery. Typically unrecovered pressure is in the region of 10 – 30% of measured DP as opposed to 40 – 90% for an orifice plate (depending onbeta ratio).

More Info : http://www.eeplindia.com/flow-elements.html

pdfdownload-button

Advertisements

Author: Electronet Equipments Pvt Ltd

Incorporated in 1993, Electronet has emerged a key player in the Indian instrumentation and automation business. Our goal is to establish ourselves as a key player in the global arena, especially process control instruments, which cater to power plants (nuclear, thermal, wind, hydro & gas based), fertilizer plants, refineries, chemical, petro‐chemical, cement, pulp & paper, sugar, pharmaceuticals, gas, water & water treatment plants, atomic research stations, and so on.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

w

Connecting to %s